Liberon Floor Sealer – 1 Litre

Liberon Floor Sealer is a natural, oil based finish for wood and parquet floors. It enhances the natural colour of new and old wood and is water, heat and alcohol resistant. Floor Sealer can be used alone to achieve a final satin to gloss finish, or as a sealer prior to waxing or varnishing with Liberon’s range of floor finishing products. It is also suitable for sealing unvarnished cork surfaces.

Oil based sealer for wood and parquet flooring.
Enhances the natural colour of new and old wood.
Seals floors prior to waxing and varnishing.
Helps protect against stains and scratching.
EN71 Part 3 Approved – Safe for toys.
Endorsed by the Guild of Master Craftsmen.

See Full instructions below

UK FREE delivery on all orders over £24

6 in stock

Free UK delivery on all orders over £24Full step-by-step instructions below

SKU Lib Wood Floor Sealer | 1L Categories Liberon, Floor Care, Wood, Wood Oils

Liberon Floor Sealer is a natural, oil-based finish designed for wood and parquet floors. It enhances the natural colour of new and old timber while helping protect the surface against everyday stains and scratches.

Floor Sealer can be used on its own to achieve a satin to gloss finish or as a base before applying Liberon Floor Wax or a suitable floor varnish. It is also suitable for sealing unvarnished cork floors. This oil-based floor finish enhances the natural colour of the timber and provides resistance against water, heat and alcohol.

Benefits of Liberon Floor Sealer

Oil-based sealer for wood and parquet floors
Enhances the natural colour of new and old timber
Helps protect against stains and scratching
Water, heat and alcohol resistant
Can be used alone for a satin to gloss finish
Ideal before applying Liberon Floor Wax or floor varnish
Suitable for sealing unvarnished cork surfaces

How to Use Liberon Floor Sealer

Sand the floor if required and remove all previous finishes.
Ensure the surface is clean, dry and free from dust.
If colouring the wood, apply Liberon Palette Wood Dye first and allow it to dry for at least 8 hours.
Shake the container well before use.
Apply a reasonable coat using a brush, roller or cloth.
Allow the oil to penetrate for 5–10 minutes.
Remove any excess with a clean, dry, lint-free cloth.
Apply a minimum of 3 coats, allowing approximately 5 hours between coats.
For porous surfaces or a higher level of finish, additional coats may be required.
If applying Liberon Floor Wax or floor varnish afterwards, allow the final coat of Floor Sealer to harden for 24 hours first.

Coverage: 1 litre covers approximately 10–12m².

Cleaning and Maintenance

Sweep or vacuum the floor regularly and clean with a damp cloth. Wipe up spills as soon as possible.

For stubborn marks, use a mild detergent or lightly sand the affected area before reapplying Liberon Floor Sealer.

When used as the final finish, floors may need to be re-sealed periodically, particularly in areas with high foot traffic.

Please Note

Oil finishes can enhance and deepen the natural colour of timber. A wet surface can give an indication of the final appearance, so always test the product on a spare piece or inconspicuous area before treating the entire floor.

Allow wood dyes to dry for at least 8 hours before applying Floor Sealer.

Do not use on vinyl or similar floor coverings. The product may also affect bitumen-based adhesives.

Important: Oily cloths and other materials used with this product can self-combust. Wet used cloths or tools with water and dispose of them safely in accordance with the manufacturer’s instructions.

Health and Safety

Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children and use only in a well-ventilated area.

Do not empty into drains. If swallowed, seek medical advice immediately and show the container or label. Contains cobalt compounds, which may produce an allergic reaction.