Liberon Iron Paste – For Cast & Wrought Ironwork

(2 customer reviews)

£13.99£39.99

Liberon Iron Paste is used to restore ornamental ironwork, cast iron grates, fire irons and cast iron fire surrounds.  It is a black graphite paste used to protect and decorate cast and wrought ironwork. It produces a silver or black look; it does not flake off and is suitable for home decorating. It reduces the possibility of rusting as the iron paste bakes itself onto the surface and then can be buffed to a high shine.

Often used on –

• Ornamental ironwork
• Cast iron fire places
• Cast iron grates & Fire irons
• Open Fire Equipment & Fire backs
• Decorative antique tools
• Iron bed frames
• iron umbrella stands

See Full instructions below

UK FREE delivery on all orders over £20

SKU: Liberon Iron Paste Categories: , ,

Description

Liberon Iron Paste is a black graphite paste used to protect and decorate cast and wrought ironwork. It produces a silver or black look; it does not flake off and is suitable for home decorating. It is especially suited to ornamental ironwork, cast iron grates and fire irons. It reduces the possibility of rusting as the iron paste bakes itself onto the surface and then can be buffed to a high shine. It comes in 250ml or 1 Litre tin sizes.

Liberon Iron Paste is especially ideal for use when restoring and renovating cast iron fire places and surrounds.

  • It is suitable for use on wrought iron
  • Iron Paste reduces the possibility of rusting
  • Iron Paste does not flake off
  • It can be buffed to a high shine
  • Black iron paste used on fireplaces

How to use Liberon Iron Paste

For this example we have a cast iron umbrella stand that was rusty and dirty. It had lost all of its colour and was in need of renovation.

cast iron umbrella stand before cleaningHow to use Liberon Iron Paste - Finished piece

1. Before applying liberon iron paste, make sure the surface is clean and free from rust. A Rust Remover may be used but if the surface has any rust etc, use a Bronze Liming Brush or course wire wool over the entire surface. This will remove the rust and also  prep the surface for a better finish. Once you have wire brushed the iron work, wipe over with a duster.

Bronze Liming Brush to remove rustwire brushed the iron work

2. Apply liberon cast iron paste sparingly to the whole surface with a brush or cotton cloth. For awkward areas, a small toothbrush is ideal. Lightly buff off any excess and leave to fully dry.

Apply Liberon Iron Paste with a clothApply Liberon Iron Paste with a brush

3. Allow to dry for a minimum of four hours before buffing with a brush or cotton cloth. If more coats are required, you can re-apply to get a better finish. For cleaning and maintenance, Re-apply and buff as necessary as this will further protect and enhance the finish.

Buff up the Liberon Iron PasteLiberon Iron Paste buffed up to a nice sheen


Please Note –

Clean brushes in white spirit after use.

Always wear protective gloves when using this product.

Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result. Do not apply to hot surfaces. Not suitable for wood burning stoves, Radiators etc.


Heath and Safety

Flammable. Keep out of reach of children. Use only in well-ventilated areas. If swallowed, do not induce vomiting, seek medical advice immediately and show this container or label.


Safety Data Sheets

Additional information

Weight N/A
Size

250ml, 1 Litre

2 reviews for Liberon Iron Paste – For Cast & Wrought Ironwork

  1. DK

    Donal Kerrin (verified owner)

    A totally rusted set of very old fire irons have been transformed to their original polished state with this amazing product. Similarly an old fire grate and a cast iron stove have been refurbished. Can wholeheartedly recommend Liberon Iron Paste for its ease of application and outstanding results.

  2. A

    Anonymous (verified owner)

Add a review

Your email address will not be published. Required fields are marked *

You may also like…