UK FREE delivery on all orders over £20UK FREE delivery on all orders over £20
0

Rustins Quick Dry Worktop Oil – 500ml

£14.99 price includes VAT

Rustins Worktop Oil is a unique water borne blend of natural plant oils and other special ingredients which nourishes and protects all types of timber. It is a quick-drying wooden work surface treatment, leaving a durable and water-resistant seal which is not vulnerable to scratching or chipping.

  • Water based & quick drying
  • For all solid wood worktops
  • Low odour and Food safe
  • Natural finish
  • Plant oils used in its formulation, originate from sustainable sources.
  • Used on any solid wood worktops from Kitchen worktops to dining room tables

Please See Full instructions below

UK FREE delivery on all orders over £20

Description

Rustins Quick Dry Worktop Oil is a unique water-borne blend of natural plant oils and other special ingredients to nourish and protect all types of timber. The plant oils originate from sustainable sources and are used largely to replace crude oil derived components used in synthetic resins. Worktop Oil is intended for use for all kind of interior hardwood and kitchen worktops. It is penetrating oil that dries to a hard durable and water resistant seal. It adds warmth and depth to all woods, including oak, beech, teak, mahogany and veneered surfaces. It does not leave a surface film to scratch or chip. It conforms to Plastic materials and Articles in contact with Food (England) Regulations 2008.

How to use Rustins Quick Dry Worktop Oil

  1. The surface must be clean, smooth, dry and free from wax, dust and contaminants.
  2. Remove wax by scrubbing with White Spirit or Rustin’s Surface Cleaner and a scouring pad, then wipe away whilst still wet with clean rags. Existing oil should be removed with Rustin’s Strypit Paint and Varnish Stripper.
  3. Bare wood may be stained before coating
  4. Shake well before use. Apply liberally with a clean rag or brush and wipe off the surplus oil after a few minutes.
  5. The first coat should be applied liberally with a brush and allowed to dry without wiping.
  6. Nibs may be removed from the final coat by applying the oil with a scouring pad, rubbing in the direction of the grain, then wiping away the surplus with clean rags or paper kitchen towels.
  7. Some wood may need sanding between two coats.
  8. Bare wood usually requires 3 coats.
  9. Drying Time usually takes around 2-3 hours depending on temperature and humidity.
  10. Re-coat once the previous coat is dry.

Please note –

Application Temperature is ideally 15-25°C, do not apply below 10°C.

Coverage is approximately 13 sq metre per litre for 1 coat, depending on the absorbency of the wood.

Clean tools with white spirit

Always test in a small inconspicuous area first to ensure you are happy with the results.

Always wear protective gloves when using this product.


Health and safety

Keep out of reach of children. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. After contact with skin wash immediately with plenty of water. Wear suitable protective clothing and gloves.

Reviews

There are no reviews yet.

Be the first to review “Rustins Quick Dry Worktop Oil – 500ml”

Your email address will not be published.