Liberon Stone Floor Cleaner – 1 Litre

Description

Liberon Stone Floor Cleaner is a water-based cleaner specially formulated to remove built-up dirt and grease from sealed and unsealed terracotta and natural stone flooring. It is ideal for cleaning and maintaining stone floors and can also be used neat on stubborn stains.

Suitable for a wide range of stone flooring, Liberon Stone Floor Cleaner helps prepare surfaces before sealing or refinishing and is suitable for both new and previously sealed stone.

• Benefits & Uses
• How to Use
• Cleaning & Maintenance
• Coverage & Product Information
• Please Note
• Health & Safety
• Safety Data Sheet

Benefits & Uses

• Removes built-up dirt and grease.
• Suitable for sealed and unsealed stone.
• Ideal for terracotta and natural stone flooring.
• Water-based formulation.
• Can be used diluted for general cleaning.
• Can be used neat on stubborn stains.
• Suitable for regular stone floor maintenance.
• Ideal for preparing stone floors before sealing or refinishing.

How to Use Liberon Stone Floor Cleaner

For General Cleaning

1. Dilute Liberon Stone Floor Cleaner to a 25% solution in warm water.
2. Apply using a floor mop or sponge.
3. Rub more vigorously over particularly dirty areas.
4. Allow the cleaner to work on the surface for 10–15 minutes.
5. Rinse several times with clean warm water.
6. Wipe dry and allow the floor to dry thoroughly.

For Stubborn Stains

1. Apply a small amount of Liberon Stone Floor Cleaner neat onto the stain.
2. Allow the product to work for approximately 15 minutes.
3. Scrub the affected area with a suitable brush.
4. Rinse thoroughly with clean water and allow to dry.

Cleaning & Maintenance

Use Liberon Stone Floor Cleaner as often as required to keep stone and terracotta flooring clean.

For new stone flooring, clean the surface thoroughly before applying a suitable stone floor sealer. Once sealed, the floor can be finished with Liberon Stone Floor Wax or Liberon Stone Floor Shine, depending on the desired finish and level of protection.

Floors treated with Liberon Stone Floor Shine should also be cleaned with Liberon Stone Floor Cleaner.

Coverage & Product Information

• Size: 1 Litre
• Coverage: Approximately 15–20m² per litre
• Drying time: Approximately 1 hour
• Application: Cloth, sponge or mop
• Tool cleaning: Water
• Base: Water-based

Please Note

• If treating new stone, once your stone or terracotta floor has been cleaned it will need protecting from water and staining with either Liberon Natural Finish Stone Floor Sealer or Liberon Colour Enhancer Stone Floor Sealer.
• Always test the product on a small, inconspicuous area before full application.
• Not suitable for cleaning waxed, vinyl or plastic floors.
• Wear suitable protective gloves when using the product.
• Rinse the floor thoroughly after cleaning and allow it to dry completely before applying a sealer or finish.
• Do not dispose of product residues or washing water into sinks, toilets, sewers or drains.

Health & Safety

Keep out of reach of children. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Use only in a well-ventilated area. Wear suitable protective gloves and protective clothing. Do not allow the product to freeze.

Safety Data Sheet

• Safety Data Sheet