Description
Hotspot Coal Paint comes in an easy to use aerosol and is a non-clogging ultra-high temperature two coat finish. It will rejuvenate faded gas coals and give them a new lease of life. It is heat resistant to over 1250⁰F (677⁰C)
How to use Hotspot Coal Paint
- Allow fire to cool before carefully removing coals.
- Remove loose paint, dust and debris with a brush and ensure that surfaces are dry before commencing painting.
- Spread out the coals onto an old newspaper.
- Before spraying, shake can vigorously for one minute, and again between bursts.
- If painting is performed in situ, carefully mask over the pilot light assembly and any surrounding fitments. Cover carpets and furnishings.
- Spray thinly; two thin coats are more effective than one thick coat
- Allow at least 24 hours before re-lighting the fire.
- Re-coating Time is 2-3 hours between coats.
Please note
The application Temperature should be cool.
Coverage is 5 – 10 sq. metres per litre depending on the condition of the surface to be coated.
Occasional highlights may appear on the renovated matt coals; this is perfectly normal and enhances their appearance, making the coals look naturally burned and ash-like, as in a real fire. These will become apparent after heat is introduced and are due to paint burning off in areas where the heat from the flame is in excess of 1250⁰C. As coals come to the end of their life span, the white ash patches become more apparent: this is an indicator that the coals require replacement, not a fault with the paint, which is supported by the coal manufacturer instructions.
It is compatible with Gas Coals.
Shelf-life/Storage 2 years if stored unopened in a cool, dry place.
Health and Safety
Flammable; harmful; harmful by inhalation and in contact with skin and eyes. Keep out of reach of children.
Reviews
There are no reviews yet