Colron Beeswax – 400g

Description

Colron Beeswax comes in several tinted colours to improve the colour of interior wood. This traditional paste wood wax will enrich the woods natural patina but also nourishes, feeds and protects wood whilst creating a nice sheen. It is ideally suited for use on wood which may have faded with time or where the current depth of colour is not as rich as required. Colron Refined Beeswax is particularly suitable for fine interior wood or furniture, which requires reviving to replenish the lustre of the finish. It has been made using an emulsified blend of waxes, containing light fast pigments and is low odour.

How to use Colron Beeswax

1. Colron Beeswax can be applied directly over previously waxed or polished surfaces but for best results old finishes should be removed.
2. Colron Refined Beeswax cannot be used over sealed surfaces such as varnish or paint.
3. Previous coatings such as wax, polish or lacquer should be removed using Colron Wax Remover. Paint or varnish must be removed using a Furniture Stripper prior to application.
4. In both cases the bare wood should be treated with Colron Wood Reviver to feed and nourish the wood.
5. If using on bare wood, ensure all surfaces are clean and dry. Lightly sand and wipe with white spirit.
6. Shake well prior to use. If the wax appears solid allow it to reach room temperature before use.
7. Apply a thin coat onto the surface by rubbing along the direction of the grain.
8. Leave to dry for at least 15 minutes.
9. Buff the surface with a lint free, soft cloth along the wood grain.
10. Leave for 2 hours before applying a second coat.
11. Further coats will provide a deeper intensity of colour.

Please note –

Dispose of application cloths safely.

For best results apply to bare wood.

Special precautions should be taken during surface preparation of pre 1960’s paint surfaces over wood as they may contain harmful lead.

Do not use paste wax over Liquid Wax as this can result in colour removal.

STORAGE – Store upright in a cool, dry, well-ventilated area away from heat and sources of ignition. Ensure container is fully resealed after use. Always store in ambient conditions away from temperature extremes. Protect from frost. Store above 50C.

The shelf life of the product in airtight containers will be at least 3 years.

HEALTH AND SAFETY

Observe and follow all warnings and instructions for use shown on the pack. Ensure good ventilation during application and drying. Avoid contact with the skin and eyes. Wear suitable gloves. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvents or thinners/white spirit. Keep out of reach of children.