Osmo Top Oil Surface Kit

Description

Osmo Top Oil Surface Kit is an all-in-one maintenance kit for Kitchen wooden worktop and table tops. It contains the following items:

• Top Oil 3058 (Clear Matt) 500ml.
• Spray Cleaner (8026) 500ml.
• Hand Pad Holder.
• Oil Finish Application Fleece.
• Abrasive Pad.
• Pair of Gloves.

How to use Osmo Top Oil Surface Kit

1. The wood surface must be clean, dry and frost-free (moisture content max. 18%). 
2. Osmo Top Oil is ready to use. Do not thin. Stir well before use.
3. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
4. Fill small cracks, larger joints or holes in wood with Osmo Wood Filler.
5. Sand wood surfaces carefully. Begin with coarse sandpaper then progress to finer grades– final sanding work for furniture P150-240 (depending on wood species ). For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150.
6. For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
7. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner.
8. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
9. Apply the first coat thinly along the wood grain with the Oil Finish Application Fleece supplied. Remove any excess Top Oil with a clean, dry lint free cloth.
10. Allow to dry for approx. 8-10 hours. Ventilate well while drying.
11. Thinly apply the second coat with the Oil Finish Applicator Fleece. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
12. For renovations, one coat applied to the clean and dry surface with an Oil Finish Applicator Fleece or lint-free cloth is usually sufficient.
13. Once the Top Oil has fully cured, clean the newly oiled surface using the cleaning spray supplied as and when required.
14. The supplied abrasive pad can be used to help remove minor scratches, scuffs or dirt from waxed or oiled work surfaces prior to cleaning and renovation.

Cleaning and Maintenance 

Regular Cleaning or mopping is recommended with damp mopping, using Osmo Spray Cleaner.

Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.

Re-coating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Safety Data Sheets

• Safety Data Sheet
• Product Information