Colron Wood Reviver – 250ml

(2 customer reviews)

£9.49

Colron Wood Reviver is made from a blend of vegetable oils and resins in aromatic hydrocarbon solvents. It is designed to replenish the essential oils in dry, tired wood after stripping to help prevent the wood warping and splitting. Colron Wood Reviver penetrates deep into the wood feeding and nourishing wooden furniture and dries to form a natural, protective barrier against spills and stains prior to finishing.

  • Made from a blend of vegetable oils and resins
  • Replenish the essential oils in dry, tired wood
  • penetrates deep, feeding and nourishing wooden furniture
  • help to prevent the wood from drying, warping or splitting
  • Contains no added lead

See Full instructions below

UK FREE delivery on all orders over £20

Description

Colron Wood Reviver is made from a blend of vegetable oils and resins in aromatic hydrocarbon solvents. It is designed to replenish the essential oils in dry, tired wood after stripping to help prevent the wood warping and splitting. Colron Wood Reviver penetrates deep into the wood feeding and nourishing wooden furniture and dries to form a natural, protective barrier against spills and stains prior to finishing.

How to use Colron Wood Reviver

  1. Previous coatings such as wax, polish or lacquer should be removed using Colron Wax Remover. Paint or varnish must be removed using a paint and varnish stripper.
  2. Ensure all surfaces are clean and dry. Lightly sand and wipe with white spirit.
  3. Shake well prior to use.
  4. Apply a thin coating Of Colron Wood Reviver with a clean, soft cloth, rubbing the liquid well into the grain, leaving none on the surface.
  5. Very old, dry or weathered wood may require a more generous application.
  6. Allow to dry for 24 hours before applying a finish.
  7. Finish using the most suitable Colron wax or oils

DRYING TIME – Allow 24 hours before applying a finish.

CLEAN-UP – Cloths and soiled rags may self-ignite without warning. Wash out well in warm soapy water before disposal. Remove as much product as possible from cloths prior to cleaning.

Apply only to bare wood.

Special precautions should be taken during surface preparation of pre 1960’s paint surfaces over wood as they may contain harmful lead.

STORAGE – Store upright in a cool, dry, well-ventilated area away from heat and sources of ignition.

Ensure container is fully resealed after use. Always store in ambient conditions away from temperature extremes. Protect from frost. Store above 5 DC.

The shelf life of the product in airtight containers will be at least 3 years.


HEALTH AND SAFETY

Observe and follow all warnings and instructions for use shown on the pack. Flammable. Keep away from sources of ignition – NO SMOKING. Ensure good ventilation during application and drying. Avoid contact with the skin and eyes. Wear suitable gloves. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvents or thinners/white spirit. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children.


Safety Data Sheets

2 reviews for Colron Wood Reviver – 250ml

  1. RH

    Richard Harrison (verified owner)

    Excellent product, and rapid delivery

  2. B

    Brian (verified owner)

    I favour this product, having used it for years. Purchase went smoothly and despatch was expeditious.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…