£7.95 – £23.95Price range: £7.95 through £23.95
Barrettine Danish Oil is a blend of oils and resins that nourishes, protects and enhances the natural grain of wood, providing an attractive low-lustre finish with excellent water repellency. Ideal for wooden furniture, doors, panelling, wood turning and non-food preparation kitchen surfaces. Suitable for interior use and sheltered exterior woodwork. Can be applied by brush or lint-free cloth and is certified food and toy safe when fully dry.
Barrettine Danish Oil is a blend of oils and resins designed to nourish, protect and enhance the natural beauty of wood. It penetrates the timber to provide an attractive low-lustre finish, bringing out the natural grain while offering good water repellency.
Ideal for wooden furniture, solid wood doors, panelling, wood turning, decorative woodwork and kitchen surfaces not used for food preparation, Barrettine Danish Oil provides a warm, natural finish. It is predominantly intended for interior use but can also be used on exterior wood in more sheltered locations with regular maintenance.
Suitable for a wide range of timber, including non-green oak, Barrettine Danish Oil can be applied using a brush or lint-free cloth. When fully dry, it is certified food and toy safe in accordance with EN 1186:2002 and EN 71:3.
Barrettine Danish Oil is a versatile wood treatment suitable for a wide variety of timber surfaces, including:
Danish Oil is particularly popular for furniture and woodwork where a natural finish is preferred. It enhances the appearance of the wood without creating a thick surface film like traditional varnish.
For the best results, apply Danish Oil to clean, dry, bare wood that is free from wax, dirt and previous coatings. Always carry out a test patch on an inconspicuous area before treating the entire surface.
Previously oiled wood may be partially sealed, particularly if it has a slight gloss. Lightly rub the surface with very fine stainless steel wool in the direction of the grain and remove any residues with white spirit before reapplying Danish Oil.
Although predominantly intended for interior use, Barrettine Danish Oil can be used on exterior timber in more sheltered locations. Exterior wood requires additional protection and regular maintenance as it is exposed to weathering.
For exterior application:
Danish Oil is not intended as a high-build exterior coating for exposed timber subject to prolonged weathering.
Barrettine Danish Oil is used to nourish, protect and enhance wood. It is suitable for furniture, doors, panelling, wood turning, decorative woodwork and kitchen surfaces not used for food preparation.
Danish Oil produces an attractive natural low-lustre finish that enhances the grain and colour of the wood. The final appearance will depend on the timber and the number of coats applied.
Yes. Barrettine Danish Oil is suitable for non-green oak and provides a water-repellent finish that enhances the natural grain. Allow new oak to dry sufficiently before applying the oil.
Yes, it can be used on suitable wooden kitchen surfaces that are not used for food preparation. It is certified food safe when fully dry, but it is not intended for direct food preparation surfaces.
Yes. Barrettine Danish Oil is certified food safe when fully dry in accordance with EN 1186:2002. However, it is intended for surfaces such as wooden furniture and kitchen surfaces not used for direct food preparation.
For new interior wood, a minimum of two coats is recommended. For exterior wood, a minimum of three coats is recommended, with thorough treatment of end grain and regular maintenance.
Allow approximately 6–10 hours between coats and a minimum of 24 hours after the final coat before use. Drying times can vary depending on temperature, ventilation, timber and the amount of oil applied.
Yes, Barrettine Danish Oil can be used on exterior timber in more sheltered locations. Exterior wood will require additional coats and regular maintenance. It is not recommended as a standalone finish for heavily exposed timber.
No. Danish Oil is intended to penetrate bare, uncoated wood. Existing varnish, paint, wax or other finishes should be removed before application to allow the oil to penetrate properly.
Clean brushes with Barrettine White Spirit while the oil is still wet. Ensure brushes are thoroughly cleaned before the oil begins to dry.
Yes. Barrettine Danish Oil is suitable for wood turning and decorative turned wooden objects, providing a natural lustre finish that enhances the grain.
From our customers
Liberon Shellac Filler Sticks are a traditional repair stick used to fill surface blemishes,
£10.99
Liberon Wood Bleacher is ideal for removing dark stains caused by rust, alcohol, damp,
£14.95
Fiddes Hard Wax Oil in Clear Satin or Clear Matt is a natural blend
£12.29 – £72.95Price range: £12.29 through £72.95
Priory Polishes Polish Reviver cleans and revives the original patina to create a beautiful
£12.95 – £149.00Price range: £12.95 through £149.00
Ready when you are
Choose your finish and tin size above, then let the grain do the talking.
£7.95 – £23.95Price range: £7.95 through £23.95
Hand-mixed in Britain
Made in Clitheroe, Lancashire
Trusted brands
Fiddes, Liberon, Osmo & more
Family run
Three generations of restorers
Polyvine Wax Finish Varnish is a traditional clear wax-like, brush on, protective varnish which
£5.27 – £93.49Price range: £5.27 through £93.49
Fiddes Mellow Wax range is formulated from a traditional recipe, developed from over ninety
£15.95
£12.95
Newsletter signup is temporarily unavailable. Please try again later.