Description
Colron Knotting Solution is a natural resin solution for sealing knots in wood prior to application of decorative coatings. Colron Knotting Solution seals resinous knots prior to over-coating with varnish, wood stain, paint and clear wax or oil. Application of Colron Knotting Solution will prevent discolouration of subsequent decorative coatings.
How to use Colron Knotting Solution
- Ensure area is clean and dry.
- Sand prior to application to provide a key and wipe with white spirit to remove any surface resin.
- Shake well before use.
- Apply on coat over the knotted area using the integral brush.
- If second coat is required apply after 15 minutes using as few strokes as possible.
Please note –
DRYING TIME – Allow 1 hour for final coat to dry prior to over coating.
Areas treated with Colron Knotting Solution accept a stain, wax, oil or varnish slightly differently to surrounding wood, always seal and finish a small inconspicuous test area to ensure suitability for use.
STORAGE – Store upright in a cool, dry, well ventilated area away from heat and sources of ignition. Ensure container is fully resealed after use. Always store in ambient conditions away from temperature extremes. Protect from frost. Store above 50C.
The shelf life of the product in airtight containers will be at least 3 years.
HEALTH AND SAFETY
Observe and follow all warnings and instructions for use shown on the pack. Specific health and safety data sheets are available on request. Highly Flammable.
Safety Data Sheets
Reviews
There are no reviews yet