Gorilla Epoxy Glue – 2 X 12.5 ml

Description

Gorilla Epoxy Glue is a two-part adhesive used for gap filling. This crystal-clear formula sets in just 5 minutes providing a high strength water resistant bond. Gorilla Epoxy Glue delivers a strong, long-lasting bond to household and automotive repairs. It can be used on Wood, Metal, Steel, aluminium, Stone, Ceramic, Tiles, Most plastics, Glass, brick and Concrete. It has an easy-to-use syringe that dispenses an equal amount of resin and hardener, that when mixed together creates a permanent, durable and water resistant bond.

How to use Gorilla Epoxy Glue

1. All surfaces to be bonded should be clean and dry.
2. To improve adhesion, roughen smooth surfaces with sandpaper before gluing.
3. Ensure your work area is well-ventilated and protected from spills.
4. Remove stir stick from middle of plunger.
5. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.
6. Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally.
7. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray.
8. The package blister can be used as a mixing tray for the first use.
9. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine.
10. Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply.
11. Remove any excess glue immediately from project surface with a dry cloth.
12. To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes.
13. Full cure achieved in 24 hours.

Please note –

Not recommended for use on polyethylene or polypropylene plastic or similar materials