Osmo Country Shades Elements – Air

Description

Osmo Country Shades Elements – Air offers 30 unique shades inspired by nature with sky, wind and weather in mind. This opaque satin, natural oil based wood finish will cover the wood and grain whilst the wood texture remains noticeable. Osmo Country Shades comes in 120 bespoke colours (see our Osmo Shop Page for all colours).

The Micro-porous surface allows the wood to breathe, so reduces swelling and shrinkage. It creates a water-repellent, extremely weatherproof and UV stable surface that does not crack, peel, flake or blister. No sanding necessary, just simply re-coat; no primer is needed. It is easy and seamless application and the finish stays workable while coating. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3)

Osmo Country Shades Elements – Air is best suited for all wood in outdoor areas where an especially durable coating is required like on timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and garden sheds, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces.

How to use Osmo Country Shades Elements – Air

1. The wood surface must be clean, dry and frost-free (moisture content max. 20%).
2. Osmo Country Shades is ready to use. Do not thin.
3. Stir well before use.
4. If possible, please apply the first coat to all sides before installation.
5. Clean old micro-porous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear dust mask while sanding.
6. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
7. The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
8. Apply with an Osmo Flat Brush and apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
9. Allow to dry for approx. 10-12 hours under good ventilation.
10. After drying, apply a second coat – also thinly.
11. When renovating, one coat applied to the clean and dry surface is usually sufficient.

---

Please note –

Clean tools with Osmo Brush Cleaner (free of aromatic compounds).

Odour: faint/mild, odourless after drying Flashpoint: > 60 °C, acc. DIN EN ISO 2719

Storage: 5 years and longer if stored in the closed original can. If thickened by frost, store at room temperature for 24 hours prior to use.

Drying time: Approx. 12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times. After 2-3 weeks, the surface is fully cured.

Coverage: Product coverage for 1 coat is 26 m²/1 l. It depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to deviations in coverage.

Note: Country Shades, based on the trusted knowledge and experience of Osmo exterior wood finishes, is available in the colour of your choice. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

---

Health and safety

Caution: Keep out of reach of children. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of selfignition). The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations. Safety data sheet available on request.

Disposal: Dispose of leftover product and completely emptied packaging according to local official guidelines (waste code number 08 01 12). Only completely emptied cans can be recycled

Ingredients: Based on natural plant oils (sunflower oil, soybean oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC. Detailed declaration of ingredients available upon request. Technical Data: Specific gravity: 1,0-1,35 g/cm³ Viscosity: 20-60s DIN EN ISO 2431/4 mm, viscid

The above mentioned information is provided to the best of our knowledge however without any liability.

---

Safety Data Sheets

• Product Information
• Safety Data

---

A01 – White Dove

A02 – Purity

A03 – White Albatross

A04 – Crystal Grey

A05 – Winter Angel

A06 – Just Breathe

A07 – Serene Grey

A08 – Naked Sauna

A09 – Bella Vista

A10 – Dusty Dream

A11 – Moment in time

A12 – Concorde

A13 – Nacreous Cloud

A14 – Scotch Mist

A15 – Shade of Grey

A16 – Vanilla Sky

A17 – Misty’s Paw

A18 -Tweeting Grey

A19 – Cullin Ridge

A20 – Silver Lining

A21 – Minimum

A22 – Spider Silk

A23 – Mostly

A24 – Hope’s Horizon

A25 – Corny Hideout

A26 – Spring Scent

A27 – Willow-in-the-wind

A28 – Wolf Moon

A29 – Drunk Bird

A30 – Alpaca Fawn

 

Find the other Osmo Elements shades below:

Osmo Country Colours